| Ethernet |
|
|
Unmanaged Ethernet Switches: |
 |
- Available in 5/8/16/24 Ports with Multimode, Single Mode Fiber Optics.
- Support auto-negotiation and auto-MDI/MDI-X
- Rigid IP-30 housing design
- Operating Temperature -40 to 70°C
- Approval – EMI; EMS; Shock; Vibration; Free Fall; Safety.
|
Managed Ethernet Switches: |
 |
| |
- Fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection).
- Open-Ring supports the other vendor’s ring technology in open architecture,
- SNMP v1/v2c/v3 support for secured network management .
|
Power / Substation Automation (IEC-61850) Complied Ethernet Switches: |
 |
· IEC 61850 and IEEE 1613 for utility substation automation and other power applications
- EL228 is KEMA tested and approved
· NEMA TS-2 for traffic control systems
· EN 50155 and EN 50121-4 for railway installations
· ANSI/ISA 12.12 and ATEX for Zone 2 hazardous locations |
|
Wireless Ethernet Switches: |
 |
- High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed.
- Secured Management by HTTPS
- Authentication supported.
- Support AP/Bridge/Repeater/AP-Client Mode.
|
Device Servers: |
 |
- 1x RS232/422/485 + 2x 10/100TX (RJ-45)
- 1x RS232/422/485 + 1x 100FX (MM SC)
- 1x RS232/422/485 + 1x 100FX (SM SC)
- 4x RS232/422/485 + 2x 10/100TX (RJ-45)
- 4x RS232/422/485 + 2x 10/100TX (RJ-45 PoE client)
- 1x RS232/422/485 + 1x 10/100TX (RJ-45) / 1x802.11b/g (WLAN client)
|
Ethernet Cable, Patch cords and Connectors: |
| |
 |
Cat5, Cat5e, Cat6, Cat7 Ethernet Cables (Straight and Crossed). |
Cat5, Cat5e, Cat6, Cat7 Patch Cords with RJ45 Connectors. |
IP20, IP65, Panel Mount RJ45 Connectors. |
|
| |
| |
|
| |
