Common Features:

• Din rail mounted.
• Module width 23 mm
• No special programming is required to set up the device.
• Includes a master in order to communicate with instruments.
• Any communication problem will be reported in the Diagnostics message.
• Includes a master in order to communicate with the instrument of the same type.

T 700 HART - FF Gateway

• Interfacing HART instruments to a FF network.
• It allows interfacing up to 4 HART instruments.
• The T700 will scan the address space for connected HART instruments, and the dynamic variables will be continuously read and updated.

T 710 MODBUS - FF Gateway

• Up to ten MODbus registers can be configured as read/write registers for general instruments set- up
• The module reads the variables from the instrument and converts this to a dynamic variable on FF.
• Four AI Function Blocks are supported. Other Function blocks can be added on request.
• The device has LAS (Master functionality).

T 500 HART - PROFIBUS PA Gateway

• The module reads the variables from the instrument and converts this to a dynamic variable on PA.
• Four AI Function Blocks are supported.  Other Function blocks can be added on request.
• The HART slaves are supposed to work in multi-drop mode