Unmanaged Ethernet Switches |
| | |
 | Switches are the heart of an Industrial Ethernet network infrastructure.
The ECO Line & Wave Line are cost-effective ways of gaining a foothold in the world of Industrial Ethernet. They feature auto-negotiation & auto-crossing integrated in to a compact aluminium housing along with following important features. |
| | |
| | | FEATURES | | Housing | Aluminium | | Length X Width X Height | 108mm X 45mm X 127.8mm | | Ports | 8 X RJ45 | | DC / AC I/P Voltage | 10-35V DC / 12 -24VAC | | I/P Frequency | 47-63Hz | | Operating Temp. | 0-60 deg. C | | Storage Temp | -40 to 85 deg C | | Installation | Din Rail Mounting | | Ingress Protection Class | IP 20 | | Standard | IEEE802.3,802.3u,802.3x, Class 1, Division2 | | Data Rate | 10BASE T or 100BASE TX ( Copper ) | | Segment Length | Copper -100Mtr, Fiber MM -2KM, | | | Fiber Single Mode -20KM | | Functionality | Autonegotiation / Autocrossing | | Flow Control | Half Duplex / Full Duplex | | Status Indication | Power / Connection / Activity | | Approval | cULus / CE / EN55024 / EN55022 ,Gost R | |
|
Managed Ethernet Switches |
 | High performance Industrial Ethernet Managed switch enables industry networks to be optimally structured for handling transport routes & network traffic throughput. All switches are protocol transparent. Every port forms its own network segment, its own collision domain. The great advantage of these switches is their ability to interconnect their ports directly.
|
| | |
| | | FEATURES | | 1 | Port – Trunking | | 2 | Port –Mirroring | | 3 | VLAN | | 4 | Quality of Service | | 5 | Differential Relay | | 6 | SNMP Management | | 7 | IGMP – Snooping | | 8 | Auto Negotiation | | 9 | Redundent Power Supply | | 10 | Programmable error relay for PLC support. | | 11 | Diffserv | | 12 | Configuration vai console ( USB ) or integrated web server. | |
. |
IP 67 Unmanaged Switches |
| |
| For direct connection to the network in the field , IP 67 Switch with eight Ethernet ports can be used in tough environment. |
| | |
| | | FEATURES | | 1 | It has got robust plastic housing ( IP67 ingress protection class) for use in the field, complying with UL94 flammability rating VO | | 2 | Strip Markers – wide range of marking systems & products | | 3 | Temp. range from -40 deg.C To 60 deg. C | | 4 | Port Trunking & Port Mirroring | | 5 | VLAN IEEE 802.1Q | | 6 | Filtering & forwarding table with faxed entries | | 7 | Selective multicast control | | 8 | Quality of Service, Configurable Relay functions | | 9 | Access to the address table | | 10 | Configuration via web interface or terminal program | | 11 | RSTP & Rapidring. | | 12 | IGNP snooping with querier functions | | 13 | Auto-crossing, Auto –negotiation, Auto - polarity | |
|
IP 67 Managed Switch |
| IAR-7002-WAlWA+ is a reliable 802.11 a/b/g WLAN Access Point with 2 ports 10/1 OOTX ports router where ETH1 for LAN ETH2 for WAN. It supports LLDP for topology discovery and STP for wireless/wired redundant connections. It also supports 802.1 X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem (56K1GPRS/3G/3.5G Modem) dial up. In the mode of Modem dial up, it support both traditional 56K modem and GPRSG/3G/3.5G Modem with USB interface. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modems. In addition, IAR-7002-WA+ also provides PD feature on ETH2 which is fully compliant with IEEE802.3af P.O.E PD specification. This feature extends the layout up to 100 meters. Therefore, IAR-7002-WAlWA+ are one of the best solution for applications of wireless communication. |
| | |
| | | FEATURES | | 1 | Auto negotiation | | 2 | Redundant Voltage supply | | 3 | Error relay for PLC support. | | 4 | SNMP V1, Rapid Ring , RSTP 802.3w | | 5 | IGMP Snooping | | 6 | Querier | | 7 | Port Mirroring, Port Filtering, Port setup functionality | | 8 | VLAN, QoS, TOS | | 9 | Diffserv, MAC based trunking | | 10 | Autocrossover, Autopolarity, filtering & forwarding table | |
| | |
ROUTERS |
 | It’s the gateway between Ethernet worlds. Weidmuller Industrial routers ensures that different networks harmonise with one another without problem & under the most stringent security standard. Routers are available for twotypical application areas : They separate Ethernet networks for data security reasons or for the purpose of configuration optimization.
In addition they facilitate access to the Internet & transmit data between individual networks. All router variations are equipped with two digital message inputs each. The Weidmuller Waveline Industrial routers are available as variations with integrated analogue, ISDN or GSM Modem.
A router can provide an option for filtering the data on the IP layer. Features such as integral firewall, Network address Translation ( NAT ) , Port address Translation ( PAT) & remote access via a modem turn such a router in to an efficient aid for achieving separation between networks. |
| | |
| | | SECURITY | | 1 | SSH Tunnel | | 2 | Virtual Private Network ( VPN ) | | 3 | Masquerading, routing without masquerading | | 4 | Virtual Mapping ( NAT ) | | 5 | Port forwarding, Special rules | | 6 | Port filter | | 7 | Stateful Packet inspection firewall ( SPI ) | | 8 | Integrated Security Data Sheet ( SDS ) | | 9 | Secure Shell | |
| | |
| | | Dial - in - Dial - Out | | 1 | Router variants with integral analogue, ISDN or GSM Modem | | 2 | RS232 port for connection of external modem ( e.g. for DSL ) | | 3 | PPPoE ( DSL) | | 4 | Dial on demand | | 5 | Call Back | |
| | |
| | | Configuration /Management | | 1 | Easy access & configuration via web interface. | | 2 | USB port can be used for direct configuration. | | 3 | The Weidmuller device Configurator ( Software package ) can be used for configuring multiple routers wih in network. | | 4 | Configuration can be inherited from other routers as needed | | 5 | Simple Network Management Protocol ( SNMP ) | |
Products 
